A K8 HAYABUSA ARM FITTED WITH PRO BILLET EXTENSIONS AND MODIFIED CALIPER CARRIER. |
| PRO AND PRO-LONG SWINGING ARM EXTENSIONS |
|---|
THESE BILLET ARM EXTENSIONS COME IN TWO LENGTHS, THEY USE THE STANDARD WHEEL SPINDLE,THE PRO VERSION WILL EXTEND THE STANDARD ARM FROM 4.5-9 INCHES. THE PRO LONG VERSION WILL EXTEND THE STANDARD ARM FROM 8.5-12 INCHES,WE ARE NOW OFFERING AN EXCHANGE SERVICE ON HAYABUSA ARMS. FROM £300.00 OTHER MODELS INCLUDE R1/FIREBLADE/ZXR/GSXR RING FOR MORE DETAILS. |
HAYABUSA STRETCHED SWINGING ARMS FROM £300.00 EXCHANGE, OR WE CAN MODIFY YOUR OWN ARM . CALL FOR DETAILS |
| FRONT FORK LOWERING |
|---|
WE CAN LOWER FRONT FORKS UP TO 2.25 INCHES FOR ALL GSXR AND ZX12 MODELS. FROM £178.00inc WE ALSO OFFER RE/VALVING AND ONE OFF SUSPENSION UNITS FOR REAR, AS WELL AS BEING ABLE TO SUPPLY ,MATRIS,HYPERPRO,OHLINS,PENSKE,AND WHITE POWER UNITS. |
| RACE CANS |
|---|
VIPER RACE SILENCERS FOR MOST MAKES IN STOCK. ALTHOUGH BEING A BUDGET PRICED CAN,WE HAVE SEEN GOOD POWER GAINS USING THESE SILENCERS,ON THE DYNO. PRICES START FROM £99 FOR A ROUND ALLOY SILENCER,AND £115.00 FOR THE OVAL OPTION. |
| BILLET THROTTLE BODY CLAMPS |
|---|
BY USING THESE BILLET CLAMPS,OVER THE RUBBER INTAKES,THEY MAKE A ROCK SOLID MOUNTING FOR THE THROTTLE BODIES. NO MORE THROTTLE BODIES LIFTING UNDER BOOST, THE BODIES ARE SO FIRMLY FITTED YOU CAN LIFT THE WEIGHT OF THE ENGINE BY THEM. (WE TRIED IT JUST TO SEE.) £200.00 ALLOY FINISH |
HAYABUSA BILLET THROTTLE BODY CLAMPS. THESE BILLET CLAMPS FIT 99-2007 MODELS |
ONE OFF WATER INJECTION / OIL CATCH TANKS BUILT TO ORDER. |
TUBULAR WHEEL CHOCK SUPPORTS BIKE FRONT WHEEL DURING TRANSIT OR FOR STORAGE. ADJUSTABLE TO FIT 15-18 INCH WHEELS £52.00 |
BILLET WHEELS BUILT AS ONE OFF. THIS EXAMPLE TAKES A 330/30/17 TYRE P.O.A |
FULL RANGE OF ARMSTRONG WAVY DISCS TO FIT MOST ROAD BIKES FROM 99-2009 FROM £74.75inc vat. PADS FROM £11.50 |
| CRANKSHAFTS |
|---|
CRANKSHAFTS LIGHTENED/KNIFE EDGED/BALANCED ALSO REMOVAL OF BALANCE GEARS. ALSO AVAILABLE BILLET AND STROKER CRANKS |
| WRIST PINS |
|---|
WE CAN SUPPLY TOOL STEEL H/DUTY WRIST PINS WHICH ARE THICKER AND FAR STRONGER THAN STANDARD PINS.
IMAGE SHOWS TOOL STEEL PIN ON LEFT STD PIN ON RIGHT |
A BILLET HAYABUSA TURBO PLENUM MODIFIED TO TAKE A SECONDARY SET OF UPRATED INJECTORS WITH A BILLET FUEL RAIL. |
ONE OFF TURBO MANIFOLDS BUILT IN 316L STAINLESS STEEL |
